The Haunted Library is located in Fenwright Manor, just behind those pocket doors in the foyer. Don't you just love the smell of old books? Actually it's just a how- to index
Showing posts with label instructions. Show all posts
Showing posts with label instructions. Show all posts

Saturday, September 20, 2025

Hatbox Ghost Painted Mask

 


Materials needed:

.Paper Towels 

. Various Size Paint Brushes 

. White paint 

.Black Paint

. Metallic Gold Paint

.Blank Face mask ( black mask preferred)

(Hatbox Ghost images used from Long Forgotten )

Just a few weeks ago I had an idea to see if I could paint the Hatbox Ghost from Haunted Mansion on a blank face mask. 

Friday, November 13, 2020

Pinecone Centerpiece

Pinecone Centerpiece Concept


I have been wanting to do this project ever since seeing a similar decoration on a cooking show in December 2018.  It consists of  three Dave Lowe style cardboard paper towel tube candles, various pinecones, and three Christmas tree ornaments. This centerpiece could be a wonderful addition to your holiday decor.


Sunday, September 6, 2020

It's Halloween ( and ya feel like dancin')

 Over the past few years, I have been through a sort of a Halloween revival. Slowly rebuilding what I have done before.  Here are a few pics from last year that got the wheels turning.  And "Halloween" by The Dead Kennedys, which is a new anthem going forward.🎃







Saturday, October 19, 2019

Jack O' The Lantern (part 4) Lighting

Now it's time to light your pumpkin.  You can use a Christmas village light (I got mine from Walmart's Christmas section)





You could also use LED candles or LED tea candles.


Carefully cut a keyhole shape in the bottom of your pumpkin.









This is how to put the Christmas light in:
You can use any color, I painted the clear light.  Yellow paint works, Maybe Orange.
one coat of paint will do.








Place light in the center of the bottom and tape it down.


     
                         


Mark for two holes on both sides of the cord

Jack O' The Lantern (part 3) The Mask

Now we make the mask.
This part is optional
You can use crafting foam sheets, cloth, felt, or cardboard.

I used some scrap cardboard.

To make the mask line up I used some old paper and taped
it over the lit Jack O'Lantern.





Trace your best mask shape over the eyes and cut out the pattern

Tape it to the mask material and trace it.
Cut it out and adjust to your  liking.



                           





Now you can paint the mask.


Jack O' The Lantern (part 2) The Hat

Here's where we make the witch hat. This step is optional.  You can put any hat on your pumpkin.

This is where the poster board comes in.  It can be any color.  I have chosen to paint it black.


I used fan covers to make the big circles. The first circle is going to be 18 inches (45.72cm)

Lay the fan cover or another big circle in the middle of the poster board and trace it.






 Carefully cut it out with scissors.

Next cut about halfway down from the bottom, then cut halfway from the side



 



The circle should have a quarter removed.





Take one side of the gap and fold or roll to the other side making a cone.  You can adjust it to the  size of your pumpkin.









                                         


After adjustments, you can glue or tape the cone together.

Jack O' The Lantern (part 1)

project concept
I have been waiting for this project for 5 years.  A Jack O' Lantern project based on the"Big Jack" or "bandit pumpkin" blow mold.
For this project you will need:


  • Foam crafting pumpkin (from Michael's, Walmart or probably any craft store)
  • Two sheets of large poster board, any color (optional )
  • paintbrushes
  • Orange, Yellow, or Apricot colored paint (craft section of Walmart or craft store)
  • Black paint 
  • String
  • Felt or sheets of craft foam (optional)
  • pumpkin carving knife or carving tool
  • scissors
  • glue
  • marker or pen
This could a fun project for the weekend.  It should take about 2 to 4 hours to complete. If you have children, maybe they could help.
Maybe a black cat too





Let's start with the Jack O' Lantern.  The design of the face is up to you.  For this project I am going with a classic pattern.



Now when using a knife or any blade, make sure you exercise extreme caution.  Take your time when carving the face.  The foam could be hard or soft.



If the knife made rough edges on the shapes, use a file, rasp, or sandpaper to make it smooth.  This will be messy.



Now here's an optional step.  I like to paint the carved edges golden yellow or orange to look like a real pumpkin.
Hard to see, but the edges look real
     
Next time: The Witch Hat

Tuesday, January 14, 2014

Behind the scenes of CREEPSHOW

Now some of you may not like horror movies at all, but there is some interesting behind the scenes footage of how a movie is made.  Most of the skills you need or already have are being used.   I watch this footage now and again to study casting and sculpting.   I happen to be a fan of the movie CREEPSHOW , and the special effects were done by Tom Savini and his assistant.  The footage has been saved to a playlist which can be viewed here

Wednesday, June 5, 2013

Ghost Lighting Set-up Still Pictures


These are still pictures from The Ghost Lighting set-up Video from Halloween 2007.  This lighting consists of two blacklights, and a blue party lightbulb.  Also featured are two of the "Haunted Candleabra" props made by Trendmasters in the mid 1990's.   They have been painted to look old.
(click on pics to enlarge)

This is the bottom of The set-up, with a blue light, a powerstrip, and a blacklight.
Also featured is a replica of the candle held by the Ghost Bride from the Haunted Mansion at Disneyland.

 

This is the top blacklight of the set-up, it is  24 inches



This picture features the ghost that is to be lit with her arm held by a rope attached to a crank motor to move the arm up and down.  The motor ran well in tests but did not work on the big night.
 
 
 
 

This is the same ghost from Halloween 2006, also in the shot is the "Haunted Candleabra" made by Trendmasters in the mid 1990's








Monday, September 19, 2011

E-Z Cinderblock Plinth

Have a heavy statue you want to use for your Halloween graveyard?   Have some cinderblocks laying around?  Why not make a plinth base? 
 
Heavy  Statue
(Resin, filled with cement)




But first, What is a plinth?
A plinth is a small base for a statue, urn, or column.  Bigger than a base, but smaller than a pedestal.

What will I need?
  • 4 to 6 cinderblocks
  • A level
  • A carpenter's square
  • Two cinderblock caps
  • 12" x 12" (30 and 1/2 cm) stepping stone
Before building the plinth, lets look at the basics of building with bricks.  Why are bricks and blocks not stacked in straight lines.  That's simple, gravity.   If the bricks are stacked together in straight lines, there is one continuous seam, which could lead to failure or cracks.   Some walls are built like this, but are reinforced.


The seams carry the weight of the wall and have a better chance of failure


But bricks are layed out in what are called staggered seams, which means, the next course of bricks is off-center on  the course below it, and has a better chance of supporting the weight of the wall.  Then the course on  top of the previous course will be staggered.
The center of the first brick supports the seam of the two bricks above it, and the weight of the wall
is supported.


Now that we know brick laying, lets get to some caution:  cinderblocks are heavy, and could fall, so if you build this plinth, put it away from guests.    Make sure the ground is level or pretty much level.  I have sunken a block cut out of my sidewalk in my flowerbed, and that is the support for the plinth.  But I doubt people will have much time to dig a hole in their yard and pour a level cement base. 



Lets get building.   First set two cinder blocks side by side, and use the level to make sure it's level.  Use the carpenter's square to line the blocks up.

Side by side
(but I switched the position)

Now set the next block course so the seams are perpendicular to the first course and check for level.




facing toward the camera
Next, repeat the previous step and check for level and square.  If you feel inclined, check for plumb by placing the level on the side.   Now you can add a course of two more bricks, but it may be difficult to place the heavy object on the plinth the higher you go.  You can go as high as 4 courses, but I would not recommend stacking the blocks any higher.  When it is level and square, add the two cinderblock caps, and check for square.

with caps added


Now it's time for the stepping stone, just for decorative purposes.   When you place the stepping stone on top, check for level, and use the carpenter's square for centering the stepping stone.

with stepping stone added

Now it's time to add the heavy object or statue,  exercise caution while lifting heavy objects, and if it's too heavy, get a friend to help.  Remember: the higher you build, the higher you will have to lift.

With statue added
(The cat watched, but she was not helpful)

Here's where you can paint the plinth, or if you know masonry, add a scratchcoat of mortar, or you can cover the plinth with monster mud.   If you want it permanent, and know masonry, you can add mortar between courses.   But remember, be careful and have fun (well, as much fun as you can have stacking blocks).   Now for a short (goofy)  video demonstrating how to build it.



(The voice I use in this video is me trying to imitate late night infomercials, which means I watch too much late night TV.  If people do not like the audio, please mute it.  The voice I use is not at all serious, but the video is.)











Thursday, September 9, 2010

Simple Ghost

This is one of my favorites. This is how I built a simple, but effective ghost. Now you can feel free to customize or change things around to your preference.

You will need:

*An old fan stand

*Spring tension shower curtain rod (take the rubber ends off)

*Duct tape

* 16"(40.6 cm) to 18"(45.7 cm) metal bar

I used an old metal bar from a broken lamp

* Rubber or Plastic skull

* Two small rubber balls

* Big white sheet (double or queen)

* Old white shirt or cheesecloth

Now I may post a video later, but for now I am just going to tell how I did this.


Take the shower curtain rod and extend it a few turns

Now measure down from the top 12" (30.4 cm)

This is where the small metal rod comes in to play

Now wrap the small metal rod across the curtain rod with duct tape, any way you want.

{This picture is what it looks like after I taped across the shower rod, and put the skull on top. }
Now for skull preferences it's your choice, I painted the skull to look ghostly and glued the small rubber balls in to the eye sockets.
Now mount the skull on top of the rod and put the other end into the fan stand.
Here's the part that's tricky: Drape the large sheet over the frame and fasten it to itself with either a clothespin or saftey pin. You may need a step ladder to do this :)
I like to use an old white shirt for the hood 'cause the sheet likes to slide off the skull.
The best thing about the shower curtain rod is it can be extended by turning the bottom part to any length. I usually extend to about 7 feet or (2.13 m) or 6 and a half feet (1.95 m)
You can put a black light on your ghost or light it from below with a blue light.

{This is from Halloween 2009 where I put the ghost on top of cinder blocks for extra height.}